Publications | Center for Plasma-Material Interactions | The Grainger College of Engineering

2026

S. Stemmley, B. Moore, D. O’Dea, R. Trendler, P.F. Buxton, P. Bunting, K. Moshkunov, M. Gryaznevich, D.N. Ruzic, “Time domain reflectometry liquid level probe for the calibration of liquid lithium direct current conduction flowmeters,” Fusion Engineering and Design, Volume 224, (2026) 115583, https://doi.org/10.1016/j.fusengdes.2025.115583.
Rizkallah, R., Shone, A., O’Dea, D., Curreli, D., Andruczyk D, “Rapid Vapor-Driven Plasma Contamination and Suppressed Net Lithium Surface Loss in the HIDRA Stellarator,” J Fusion Energ 45, 39 (2026). https://doi.org/10.1007/s10894-026-00582-y

2025

Dongho Lee, Zachary Jeckell, Nicholas Connolly, David N Ruzic, “Characterizing fast electrons at the onset of cathode voltage reversal of high-power impulse magnetron sputtering of a graphite target,” Plasma Sources Science and Technology, Volume 34, Number 9, (2025) 095005 https://doi.org/10.1088/1361-6595/ae0154
Gianluca Panici, John R. Spoore, Dren Qerimi, Md. Amzad Hossain, David N. Ruzic, “Multiple distinct plasmas in extreme ultraviolet lithography sources,” J. Micro/Nanopattern. Mats. Metro. 24(3) 033801 (9 September 2025) https://doi.org/10.1117/1.JMM.24.3.033801
Parker Hays, Dhruval Patel, Michael Stowell, Dren Qerimi, David Ruzic; “Evolution of graphene nanoflake size and morphology in atmospheric pressure microwave plasma.” J. Vac. Sci. Technol. B 1 July 2025; 43 (4): 042801. https://doi.org/10.1116/6.0004741
Nicholas Connolly, Zachary Jeckell, Rajib Paul, Nicolas Vincent, Piotr Jankowski, Dongho Lee, Brian Jurczyk, David N. Ruzic, Carbon coatings deposited on 316L bipolar plates via HiPIMS with cathode reversal for low interfacial contact resistance and high corrosion resistance, International Journal of Hydrogen Energy, Volume 193, 2025, 152464, ISSN 0360-3199, https://doi.org/10.1016/j.ijhydene.2025.152464.

2024

James Bramble, Cody Moynihan , Steven Stemmley , Jackson Stermer, Jaime Robertson , Natalie Weissburg, and David N. Ruzic, “Ejection of molten tin in the presence of a hydrogen plasma“, Fusion Engineering and Design, Vol. 207, 114622, 2024.

Stemmley, S., Moore, B., Moynihan, C., Yang, O., Skrecky, K., & David N. Ruzic , “Contact angle measurements of liquid lithium on surface-modified stainless steel, insulating materials, and other metals and coatings”, Fusion Engineering and Design, Volume 208, November 2024, 114649 https://www.sciencedirect.com/science/article/pii/S0920379624005003
N.A. Pablant, D. Anderson, J.K. Anderson, S. Anderson, D. Andruczyk, et. al, “The Compelling Need for a Mid-Scale Stellarator Facility”, National Stellarator Coordinating Committee, USDOE Office of Science (SC), Fusion Energy Sciences (FES), PPPL-2024_394, February 13, 2024 https://doi.org/10.2172/2370175 / https://www.osti.gov/biblio/2370175
Nathan Bartlett, Andrew Herschberg, Gordon Jameson Crouse, Tamar Dallal, James Nuttall, Jack Stahl, Niels Braaksma and David N Ruzic, “Elastic scattering cross sections and transport of tin ions in extreme ultraviolet lithography sources”, Physics Scripta, May 13, 2024. Bartlett et al 2024 Phys. Scr. https://doi.org/10.1088/1402-4896/ad4a9c
David Graves, Catherine Labelle, Mark Kushner, Eray Aydil, Vincent M Donnelly, Jane Chang, Peter Mayer, L. Overzet, Steven Shannon, Shahid Rauf, David N. Ruzic, “Science Challenges and Research Opportunities for Plasma Applications in Microelectronics”, Journal of Vacuum Science and Technology B, March 21, 2024 (Accepted for Publication).
Nicholas Connolly, Michael Hysick, David E. Barlaz, Raquel Garza, Gilberto Lunardi, David N. Ruzic, “Characterization of elastomer degradation in O₂/Ar plasma via mass and surface morphology changes”, Journal of Vacuum Science and Technology A, Vol. 42, 023004, 2024.

2023

Andrew Shone, Rabel Rizkallah, Daniel O’ Dea, Brandon Kamiyama, Daniel Andruczyk, “In-operando Lithium Evaporation Inducing Helium Retention in Long-Pulse HIDRA Helium Plasma”, Journal of Fusion, s10894-023-00383-7, 42:43, 2023. (https://link.springer.com/article/10.1007/s10894-023-00383-7)
D. Andruczyk, R. Rizkallah, D. O’Dea, A. Shone, S. Smith, B. Kamiyama, R. Maingi, C. E. Kessel, S. Smolentsev, T. W. Morgan & F. Romano, Overview of Liquid-Metal PFC R&D at the University of Illinois Urbana-Champaign, 2023. https://doi.org/10.1080/15361055.2023.2171259
Gianluca Panici and David N. Ruzic, “Tin Mitigation in EUV Sources”, Chapter 18, Photon Sources for Lithography and Metrology edited by Vivek Bakshi, SPIE, Washington, 2023.
Rquel Garza, Nathan Bartlett, Jameson Crouse, Andrew Herschberg, R. Mohan Sankaran, Md. Amzad Hossain, David N. Ruzic, “Stannane in extreme ultraviolet lithography and vacuum technology” Synthesis and characterization”, Journal of Vacuum Science & Technology A, vol. 41, 063209, 2023.
Cody D. Moynihan, Steven Stemmley, Brady Moore, Riley Trendler, Md. Amzad Hossain, David N. Ruzic, “Characterization of liquid lithium corrosion for fusion reaction materials”, Fusion Engineering and Design, volume 199, 114102, February 2024. (Available in online on 19 December 2023)

2022

G.Z. Zuo, C.L. Li, R. Maingi, X.C. Meng, D. Andruczyk, P.J. Sun, Z. Sun, W. Xu, M. Huang, Z.L. Tang, D.H. Zhang, Y.J. Chen, Q. Zang, Y.M. Wang, Y.F. Wang, K. Tritz, J.S. Hu, “Effect of continuously flowing liquid Li limiter on particle and heat fluxes during H-mode discharges in EAST”, Nuclear Materials and Energy 33 (2022) 101263. https://doi.org/10.1016/j.nme.2022.101263
Daniel Andruczyk, Andrew Shone, Zachariah Koyn and Jean Paul Allain, “First lithium experiments in HIDRA and evidence of helium retention during quasi-steady-state stellarator plasma operations”, Plasma Phys. Control. Fusion 64 (2022) 085011. https://doi.org/10.1088/1361-6587/ac7973
Chenglong LI, Guizhong ZUO, R MANIGI, K TRITZ, D ANDRUCZYK, Bin ZHANG, Ruirong LIANG, D OLIVER, Zhen SUN, Wei XU, Xiancai MENG, Ming HUANG, Zhongliang TANG, Binfu GAO, Ning YAN and Jiansheng HU, “Evidence of vapor shielding effect on heat flux loaded on flowing liquid lithium limiter in EAST“, Plasma Sci. Technol. 24 (2022) 095104. https://doi.org/10.1088/2058-6272/ac6650
Shone, Z. Koyn, B. Kamiyama, E. Perez, L. Barrus, N. Bartlett, J.P. Allain, D. Andruczyk, “HIDRA-MAT liquid metal droplet injector for liquid metal applications in HIDRA”, Fusion Engineering and Design 180 (2022) 113193. https://doi.org/10.1016/j.fusengdes.2022.113193
X.C. Meng, L. Li, C.L. Li, D. Andruczyk, K. Tritz, R. Maingi, M. Huang, D.H. Zhang, W. Xu, Z. Sun, G.Z. Zuo, J.S. Hu, “Corrosion characteristics of Mo and TZM alloy for plasma facing components in molten lithium at 623 K“, Corrosion Science 200 (2022) 110202. https://doi.org/10.1016/j.corsci.2022.110202
Jeckell, Z., D. E. Barlaz, T. Houlahan, W. Huber, I. Haehnlein, B. Jurczyk and D. N. Ruzic, “Time-resolved ion energy distribution functions during a HiPIMS discharge with cathode voltage reversal“, Physica Scripta 98, (2022). https://doi.org/10.1088/1402-4896/aca5c7
Qerimi. D, Herschberg AC, Panici. G, Hays. P, Pohlman. T, and Ruzic. DN, “Tin removal by an annular surface wave plasma antenna in an extreme ultraviolet lithography source“, Journal of Applied Physics Volume 132, (2022) 113302. https://doi.org/10.1063/5.0094375
Matlis, E.H., T. C. Corke, D. Qerimi and D. Ruzic, “Single Electrode A.C. Plasma Anemometer in High Speed H2 Jet With Background RF Plasma“, AIAA Aviation 2022, (2022). https://doi.org/10.2514/6.2022-3364
Huber, W., T. Houlahan, Z. Jeckell, D. Barlaz, I. Haehnlein, B. Jurczyk and D.N. Ruzic, “Time-resolved electron energy distribution functions at the substrate during a HiPIMS discharge with cathode voltage reversal“, Plasma Sources Science and Technology, Volume 31, Number 6, (2022) 065001. https://doi.org/10.1088/1361-6595/ac6d0a
Szott, SM., S. Stemmley, C. Moynihan, A. de Castro, D. N. Ruzic, “Structured Large-Pore Foams Improve Thermal Performance of LiMIT-style Liquid Lithium PFC“, Nuclear Fusion, Volume 62, Number 1, (2022). https://doi.org/10.1088/1741-4326/ac39f3

2021

Ruzic, D.N., C. Oh, J.V. Puthussery, D. Patel, Z. Jeckell, V. Verma, and T.H. Nguyen, “A Plasma-Generating N-95 Respirator Decontamination Unit Created from a Microwave Oven”, Plasma Medicine, Volume 11, Issue 3, (2021). https://doi.org/10.1101/2020.07.28.20163915
Patel, D., L. Bonova, Z. Jeckell, D. Barlaz, S. Chaudhuri, D. Krogstad, and Ruzic, D. “Deposition of Zirconium Oxide using Atmospheric Pressure Plasma Enhanced Chemical Vapor Deposition with Various Precursors”, Thin Solid Films, 733, (2021), 138815. https://doi.org/10.1016/j.tsf.2021.138815
De Castro, A., Moynihan, C., Stemmley, S., Szott, M., and Ruzic, D. “Lithium, a path to make fusion energy affordable”, Physics of Plasmas, 28, (2021), 050901. https://doi.org/10.1063/5.0042437
Qerimi, D.,Panici, G., Jain, A., Jacobson, D., & Ruzic, D. N., “Determination of recombination coefficients for hydrogen, oxygen, and nitrogen gasses via in situ radical probe system”, Journal of Vacuum Science & Technology A, 39(2), (2021) 023004. https://doi.org/10.1116/6.0000787
Qerimi, D., Shchelkanov, I., Panici, G., Jain, A., Wagner, J., & Ruzic, D. N., “Radical probe system for in situ measurements of radical densities of hydrogen, oxygen, and nitrogen”, Journal of Vacuum Science & Technology A, 39(2), (2021) 023003. https://doi.org/10.1116/6.0000786
Jeckell, Z., Patel, D., Herschberg, A., Choi, T., Barlaz, D., Bonova, L., … Ruzic, D. (2021). Silicon Dioxide Deposited Using Atmospheric Pressure Plasma Chemical Vapor Deposition for Improved Adhesion and Water Intrusion Resistance for Lightweight Manufacturing”, Surfaces and Interfaces, 23, (2021) 100989. https://doi.org/10.1016/j.surfin.2021.100989

2020

A. de Castro, C. Moynihan, S. Stemmley, M. Szott, D. Andruzcyk and D. N. Ruzic, “Exploration of Sn₇₀Li₃₀ tin lithium alloy as possible material for flowing liquid metal plasma facing components” , Nuclear Materials and Energy 25 (2020) 100829
A. Shone, Z. Koyn, A. Kapat, R. Rizkallah, D. O’Dea, G. Golba, T. Hoffman, D. Kurukulasuriya, Q. Tang, A. de Castro, J. P. Allain and D. Andruczyk. “An overview of the Hybrid Illinois Device for Research and Applications material analysis test stand”, Journal of Fusion energy, 2020, accepted article in press. https://doi.org/10.1007/s10894-020-00260-7
Dren Querimi, Gianluca Panici, Arihant Jain, Daniel Jacobson, David N. Ruzic, Study of a Linear Surface Wave Plasma Source for Tin removal in an extreme ultraviolet source”, 00331 Journal of vacuum science and technology B (2020) DOI: 10.1116/6.0000200
G. Z. Zuo, C. L. Li, R. Maingi, X. C. Meng, Z. Sun, W. Xu, Y. Z. Qian, M. Huang, Z. L. Tang, D. H. Zhang, L. Zhang, Y. J. Chen, S. T. Mao, Y. M. Wang, H. L. Zhao, D.Andruczyk, K. Tritz, X. Z. Gong, J. S. Hu, “Results from a new flowing liquid Li limiter with TZM substrate during high confinement plasmas in the EAST device” Physics of Plasmas 27 052506 (2020) https://doi: 10.1063/1.5143179
D Andruczyk, R Maingi, J S Hu, G Z Zuo, R Rizkallah, M Parsons, A Shone, D O’Dea, A Kapat, M Szott, S Stemmley, Z Sun, W Xu, X C Meng, R Lunsford, E P Gilson, A Diallo, K Tritz, “Overview of lithium injection and flowing liquid lithium results from the US-China collaboration on EAST”, Physica Scripta, 2020 T171
X.C. Meng, M. Huang, C. L. Li, Z. Sun, W. Xu, R. Maingi, K. Tritz, D. Andruczyk, Y. Z. Qian, Q. X. Yang, X. L. Yuan, J. J. Huang, X. Gao, B. Yu, J. G. Li, G. Z. Zuo, J. S. Hu, “Real-time gas cooling of flowing liquid lithium limiter for the EAST” Fusion Engineering and Design 154, (2020) 111537
M. Szott and D. N. Ruzic, “2D moving mesh modeling of lithium dryout in open surface liquid metal applications” Fusion Engineering and Design 154, (2020) 111152
Lucia Bonova, Weikun Zhu, Dhruval K. Patel, Daniel V. Krogstad and David N. Ruzic, Atmospheric pressure microwave plasma for aluminum surface cleaning”, Journal of Vacuum Science Technology A 38, 023002 (2020) https://doi.org/10.1116/1.5132912

2019

Jan Uhilg, David E. Barlaz, David N. Ruzic, “Reduction in a-Si:H density utilizing a secondary plasma”, J. Micro/Nanolithography, MEMS and MOEMS 18(4), 044502 (2019), doi: 10.1117/1.JMM.18.4.044502.
Rabel Rizkallah, Steven Carcinoma, Davide Curreli, Matthew S. Parsons, Nathan Bartlett, Raanan Gluck, Andrew Shone, and Daniel Andruczyk, “Mapping of the HIDRA stellarator magnetic flux surfaces“, Physics of Plasmas 26, 092503 (2019)
C. E. Kessel, D. Andruczyk, J. P. Blanchard, T. Bohm, A. Davis, K. Hollis, P. W. Humrickhouse, M. Hvasta, M. Jaworski, J. Jun, Y. Katoh, A. Khodak, J. Klein, E. Kolemen, G. Larsen, R. Majeski, B. J. Merrill, N. B. Morley, G. H. Neilson, B. Pint, M. E. Rensink, T. D. Rognlien, A. F. Rowcliffe, S. Smolentsev, M. S. Tillack, L. M. Waganer, G. M. Wallace, P. Wilson, and S-J. Yoon, “Critical Exploration of Liquid Metal Plasma-Facing Components in a Fusion Nuclear Science Facility”, Fusion Science and Technology (2019), Accepted, article in press
Chisung Ahn, John Gill and David N. Ruzic, “Growth of Plasma-Treated Corn Seeds Under Realistic Conditions – 2019“, Nature Scientific Reports 9, 4355 (2019)
P. A. Piotrowicz, R. H. Goulding, J. F. Caneses, D. L. Green, J. B. O. Caughman, C. Lau, J. Rapp and D. N. Ruzic, “Computational Investigation of Ion Cyclotron Heating on Proto-MPEX”, Physics of Plasmas, Volume 26, 033511 (2019) PoP Piotrowicz 2019
J. S. Hu, G. Z. Zuo, R. Maingi, Z. Sun, K. Tritz, W. Xu, Q.X. Yang, D. Andruczyk, M. Huang, X. C. Meng, X. Z. Gong, D. N. Ruzic, M. J. Ni, B. N. Wan, J. G. Li and EAST Team, “Experiments of continuously and stably flowing lithium limiter in EAST towards a solution for the power exhaust of future fusion devices”, Nuclear Materials and Energy, Volume 18, 99-104 (2019)
X.C. Meng, C. Xu, G.Z. Zuo, M. Huang, K. Trits, D. Andruczyk, Z. Sun, W. Xu, Y.Z. Qian, J.J. Huang, X. Gao, B. Yu, J.G. Li, J.S. Hu, Huiqui Deng, “Corrosion characteristics of copper in static liquid lithium under high vacuum”, Journal of Nuclear Materials, Volume 513, 282-292 (2019)
Michael Christenson, Dario Panici, Cody D Moynihan, John Wendeborn, Jacob Anderson and David N Ruzic, “A study on hydrogen absorption and dissolution in liquid lithium”, Nuclear Fusion Volume 59 (2019) Number 2, 026011

2018

Michael Christenson, Cody D. Moynihan and David N. Ruzic, “A distillation column for hydrogen isotope removal from liquid lithium”, Fusion Engineering and Design, Volume 135, 81-87 (2018)
M. Szott, Z. Wang, D.N. Ruzic, “Reconstruction and analysis of exploding wire particle trajectories via automatic calibration of stereo images”, Review of Scientific Instruments, Volume 89, 10k118 (2018)
Joseph L. Bottini, Vineet Kumar, Sabrina Hammouti, David Ruzic, Caleb S. Brooks, “Influence of Wettability due to Laser-Texturing on Critical Heat Flux in Vertical Flow Boiling“ International Journal of Heat and Mass Transfer, Volume 127, Page 806-817
Jake McLain, Priya Raman, Dhruval Patel, Randall Spreadbury, Jan Uhlig, Ivan Shchelkanov, D.N. Ruzic, “Linear magnetron HiPIMS high deposition rate magnet pack” Vacuum, Volume 155, Page 559-565 (2018)
Priya Raman, Matthew Cheng, Justin Weberski, Wenyu Xu, Thomas Houlahan, Jose Rivera, Rui Su, Ivan Shchelkanov, David Ruzic, “Magnetic Field Influence on Ionization Zones in High-Power Impulse Magnetron Sputtering” Vacuum, Volume 156, Page 9-19 (2018)
M. Mozetič A. Vesel, G. Primc, C. Eisenmenger-Sittner, J. Bauer, A. Eder, G.H.S. Schmid, D.N. Ruzic, Z. Ahmed, D. Barker, K.O. Douglass, S. Eckel, J.A. Fedchak, J. Hendricks, N. Klimov, J. Ricker, J. Scherschligt, J. Stone, G. Strouse, I. Capan, M. Buljan, S. Milošević, C. Teichert, S.R. Cohen, A.G. Silva, M. Lehocky, P. Humpoliček, C. Rodriguez, J. Hernandez-Montelongo, D. Mercier, M. Manso-Silván, G. Ceccone, A. Galtayries, K. Stana-Kleinschek, I. Petrov, J.E. Greene, J. Avila, C.Y. Chen, B. Caja-Munoz, H. Yi, A. Boury, S. Lorcy, M.C. Asensio, J. Bredins, T. Gans, D. O’Connell, J. Brendin, F. Reniers, A. Vincze, M. Anderle, L. Montelius, “Recent developments in surface science and engineering, thin films, nanoscience, biomaterials, plasma science, and vacuum technology” Thin Solid Films, Volume 660, Page 120-160 (2018)
S. Hammouti , B. Holybee, M. Christenson, M. Szott, K. Kalathiparambil, S. Stemmley, B. Jurczyk, D.N. Ruzic, “Wetting of liquid lithium on fusion-relevant materials microtextured by femtosecond laser exposure” Journal of Nuclear Materials, Volume 508, Page 237-248 (2018)
R. Rizkallah, D. Andruczyk, A. Shone, D. Johnson, Z. Jeckell, S. Marcinko, Z. Song, D. Curreli, F. Bedoya, A. Kapat, J.P. Allain, M. Christenson, M. Szott, S. Stemmley, H. Sandefur, D.N. Ruzic, R. Maingi, J. Hu, G. Zuo, J. Schmitt, “Latest Results From the Hybrid Illinois Device for Research and Applications (HIDRA)” IEEE Transactions on Plasma Science, Volume 46, Number 07, Page 2685-2690 (2018)
B. Wu, Y. Yu, J. Wu, I. Shchelkanov, D.N. Ruzic, N. Huang, Y.X. Leng, “Tailoring of titanium thin film properties in high power pulsed magnetron sputtering” Vacuum, Volume 150, Page 144-154 (2018)
P.A Piotrowicz, J.F. Caneses, M.A. Showers, D.L. Green, R.H. Goulding, J.B.O. Caughman, T.M. Biewer, J. Rapp, D.N. Ruzic, “Direct measurement of the transition from edge to core power coupling in a light-ion helicon source” Physics of Plasma, Volume 25, Issue 5, Page 052101 (2018)
S. Hammouti, B. Holybee, W. Zhu, J.P. Allain, B. Jurczyk, D.N. Ruzic “Titanium nitride formation by a dual-stage femtosecond laser process” Applied Physics A, Volume 124, Page 411 (2018)
P.A. Piotrowicz, J.F. Caneses, D.L. Green, R.H. Goulding, C. Lau, J.B.O. Caughman, J. Rapp, D.N. Ruzic “Helicon Normal Modes in Proto-MPEX” Plasma Sources Science and Technology, Volume 27, Page 055016 (2018)
W.K. Zhu, K.K. Kalathiparambil, Z.G. Sun, C.Y. Liu, A.M. Zhu, D.N. Ruzic, “Enhanced Effect of a Plasma-Irradiated Titanium Substrate on the Photocatalytic Activity of a TiO2 Film” Plasma Processes and Polymers, Volume 15, Issue 5, Page 1700223 (2018)
B. Wu, I. Haehnlein, I. Shchelkanov, J. McLain, D. Patel, J. Uhlig, B. Jurczyk, Y. Leng, D. N. Ruzic, “Cu films prepared by bipolar pulsed high power impulse magnetron sputtering” Vacuum, Volume 150, Page 216-221 (2018)
D. Johnson, K. Wegley, R. Rizkallah, A. Shone, D. Andruczyk, ”HIDRA Control System (HCS): A LaVIEW-based program to control the Hybrid Illinois Device for Research and Applications” Fusion Engineering and Design, Volume 128, Page 215-222 (2018)
X. Meng, G. Zuo, W. Xu, Z. Sun, M. Huang, X. Yuan, C. Xu, W. Hu, D. Andruczyk, J. Hu, H Deng, ”Effect of temperature on the corrosion behaviors of 304 stainless steel in static liquid lithium” Fusion Engineering and Design, Volume 128, Page 75-81 (2018)
David A. Gates, David Anderson, S. Anderson, M. Zarnstorff1, Donald A. Spong, Harold Weitzner, G. H. Neilson, D. Ruzic, D. Andruczyk, J. H. Harris, H. Mynick, C. C. Hegna, O. Schmitz, J. N. Talmadge, D. Curreli, D. Maurer, A. H. Boozer, S. Knowlton, J. P. Allain, D. Ennis, G. Wurden, A. Reiman, J. D. Lore, Matt Landreman, J. P. Freidberg10, S. R. Hudson, M. Porkolab, D. Demers, J. Terry, E. Edlund, S. A. Lazerson, N. Pablant, R. Fonck, F. Volpe, J. Canik, R. Granetz, A. Ware, J. D. Hanson, S. Kumar, C. Deng, K. Likin, A. Cerfon, A. Ram, A. Hassam, S. Prager, C. Paz-Soldan, M. J. Pueschel, I. Joseph, A. H. Glasser “Stellarator Research Opportunities: A Report of the National Stellarator Coordinating Committee” Journal of Fusion Energy, Volume 37, Issue 1, Page 51-94 (2018)

2017

Z. Sun , R. Lunsford, R. Maingi, J. S. Hu, D. K. Mansfield, A. Diallo, K. Tritz, J. Canik Z. Wang, D. Andruczyk, Y. M. Wang, G. Z. Zuo, M. Huang, W. Xu, X. C. Meng, ”First Results of ELM Triggering With a Multichamber Lithium Granule Injector Into EAST Discharges” IEEE Transactions on Plasma Science, Volume 46, Number 5, Page 1076-1080 (2017)
M.S. Parsons, “Interpretation of machine-learning-based disruption models for plasma control” Plasma Physics and Controlled Fusion, Volume 59, Number 8, Page 085001 (2017)
Q. Yang, K. Kalathiparambil, D.T. Elg, D. Ruzic, W.M. Krivem, “Microstructural damage of α-Al2O3 by high energy density plasma” Acta Materialia, Volume 132, Page 479-490 (2017)
D.T. Elg, G.A. Panici, J.A. Peck, S.N. Srivastava, D.N. Ruzic, “Modeling and measurement of hydrogen radical densities of in situ plasma-based Sn cleaning source” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 16, Number 2, Page 023501 (2017)
J.A. Peck, P. Zonooz, D. Curreli, G.A. Panici, B.E. Jurczyk, D.N. Ruzic, “High deposition rate nanocrystalline and amorphous silicon thin film production via surface wave plasma source” Surface and Coating Technology, Volume 325, Page 370-376 (2017)
M. Ono, R. Majeski, M. Jaworski, Y. Hirooka, R. Kaita, T. Gray, R. Maingi, C. Skinner, M. Christenson, D. Ruzic, “Liquid lithium loop system to solve challenging technology issues for fusion power plant” Nuclear Fusion, Volume 57, Number 11, Page 116056 (2017)
D.N. Ruzic, M. Szott, C. Sandoval, M. Christenson, P. Fiflis, S. Hammouti, K. Kalathiparambil, I. Shchelkanov, D. Andruczyk, R. Stubbers, C. Joel Foster, B. Jurczyk, “Flowing liquid lithium plasma-facing components – Physics, technology and system analysis of the LiMIT system” Nuclear Materials and Energy, Volume 12, Page 1324-1329 (2017)
M. Christenson, S. Stemmley, S. Jung, J. Mettler, X. Sang, D. Martin, K. Kalathiparambil, D.N. Ruzic, “Determining the ion temperature and energy distribution in a lithium-plasma interaction test stand with a retarding field energy analyzer” Review of Scientific Instruments, Volume 88, Issue 8, Page 083501 (2017)
D.T. Elg, G.A. Panici, S. Liu, G. Girolami, S.N. Srivastava, D.N. Ruzic, “Removal of Tin from Extreme Ultraviolet Collector Optics by In-Situ Hydrogen Plasma Etching” Plasma Chemistry and Plasma Processing, Volume 38, Issue 1, Page 223-245 (2017)
J.A. Peck and D.N. Ruzic, “Mechanism behind dry etching of Si assisted by pulsed visible laser” Journal of Applied Physics, Volume 122, Issue 17, Page 173304 (2017)
J.A. Peck and D.N. Ruzic, “Sub-damage-threshold plasma etching and profile tailoring of Si through laser-stimulated thermal desorption” Journal of Vacuum Science & Technology A, Volume 36, Issue 2, Page 021301 (2017)
J. Drobny, A. Hayes, D. Curreli, D.N. Ruzic, “F-TRIDYN: A Binary Collision Approximation code for simulating ion interactions with rough surfaces” Journal of Nuclear Materials, Volume 494, Page 278-283 (2017)
S.A. Krat, A.S. Popkov, Yu. M. Gasparyan, A.A. Pisarev, P. Fiflis, M. Szott, M. Christenson, K. Kalathiparambil, David N. Ruzic, “Wetting properties of liquid lithium on lithium compounds” Fusion Engineering and Design, Volume 117, Page 199-203 (2017)

2016

P. Fiflis, N. Connolly, D. N. Ruzic, “Experimental mechanistic investigation of the nanostructuring of tungsten with low energy helium plasmas” Journal of Nuclear Materials, Volume 482, Page 201-209 (2016)
F.L. Tabares, Y. Hirooka, R. Maingi, G. Mazzitelli, V. Mirnov, R. Nygren, M. Ono and D.N. Ruzic, “Conference Report on the 4rd International Symposium on Lithium Applications” Nuclear Fusion, Volume 56, Number 12, Page 127002 (2016)
P. Raman, J. Weberski, M. Cheng, I. Shchelkanov, D.N. Ruzic, “A high power impulse magnetron sputtering model to explain high deposition rate magnetic field configurations” Journal of Applied Physics, Volume 120, Issue 16, Page 163301 (2016)
D. Elg, J.R. Sporre, G.A. Panici, S.N. Srivastava, D.N. Ruzic, “In-situ collector cleaning and EUV reflectivity restoration by hydrogen plasma for EUV sources” Journal of Vacuum Science & Technology A, Volume 34, Issue 2, Page 021305 (2016)
J.R. Sporre; D.T. Elg; K.K. Kalathiparambil; D.N. Ruzic, “Modeling and measuring the transport and scattering of energetic debris in an extreme ultraviolet plasma source” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 15, Number 1, Page 013503 (2016)
P. Fiflis, M. Christenson, M. Szott, K. Kalathiparambil, D.N. Ruzic, “Free surface stability of liquid metal plasma facing components” Nuclear Fusion, Volume 56, Number 10, Page 106020 (2016)
J. Ren, G.Z. Zuo, J.S. Hu, Z. Sun, J.G. Li, L.E. Zakharov, D.N. Ruzic, W.Y. Xu, “Investigations on interactions between the flowing liquid lithium limiter and plasmas” Fusion Engineering and Design, Volume 102, Page 36-43 (2016)

2015

S. Mujumdar, D. Curreli, S. Kapoor, D.N. Ruzic, “Modeling of Melt-Pool Formation and Material Removal in Micro-Electrodischarge Machining” Journal of Manufacturing Science and Engineering, Volume 137, Page 031007 (2015)
S. Mujumdar, D. Curreli, S. Kapoor, D.N. Ruzic, “Model-Based Prediction of Plasma Resistance, and Discharge Voltage and Current Waveforms in Micro-Electrodischarge Matching” Journal of Micro and Nano-Manufacturing, Volume 4, Page 001003 (2015)
P. Fiflis, T.W. Morgan, S. Brons, G.G. Van Eden, M.A. Van Den Berg, W. Xu, D. Curreli, D.N. Ruzic, “Performance of the lithium metal infused trenches in the magnum PSI linear plasma simulator” Nuclear Fusion, Volume 55, Number 11, Page 113004 (2015)
P. Fiflis, M.P Christenson, N. Connolly, D.N. Ruzic, “Nanostructuring of Palladium with Low-Temperature Helium Plasma” Nanomaterials, Volume 5, Issue 4, Page 2007-2018. (2015)
N. Li, Y. Wu, J. Hong, I. Shchelkanov, D.N. Ruzic, “SiOx Deposition on Polypropylene-coated Paper with a Dielectric Barrier Discharge at Atmospheric Pressure” IEEE Transaction on Plasma Science, Volume 43, Number 9, Page 3205-3210 (2015)
L. Meng, H. Yu, J.R. Sporre, P. Raman, M.M. Szott, J.T. McLain, D.N. Ruzic, “Direct measurement and modeling of the redirected ion flux in a high-powered pulsed-plasma magnetron” Journal of Vacuum Science & Technology A, Volume 33, Issue 3, Page 031301 (2015)
W. Xu, P. Fiflis, M. Szott, K. Kalathiparambil, S. Jung, M. Christenson, I. Haehnlein, A. Kapat, D. Andruczyk, D. Curreli, D.N. Ruzic, “Vertical flow in the Thermoelectric Liquid Metal Plasma Facing Structures (TELS) facility at Illinois” Journal of Nuclear Materials, Volume 463, Page 1181-1185 (2015)
P. Raman, I.A. Shchelkanov, J. McLain, D.N. Ruzic, “High power pulsed magnetron sputtering: A method to increase deposition rate“ Journal of Vacuum Science & Technology A, Volume 33, Issue 3, Page 031304 (2015)
P. Fiflis, D. Curreli, D.N. Ruzic, “Direct time-resolved observation of tungsten nanostructured growth due to helium plasma exposure“ Nuclear Fusion, Volume 55, Number 3, Page 033020 (2015)
D.T. Elg, J.R. Sporre, D. Curreli, I.A. Shchelkanov, D.N. Ruzic, K.R. Umstadter, “Magnetic debris mitigation system for extreme ultraviolet sources” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 14, Number 1, Page 013506 (2015)
S. M. Kaye, T. Abrams, J.-W. Ahn, J. P. Allain, R. Andre, D. Andruczyk, F. Bedoya, D. N. Ruzic, et al., “An overview of recent physics results from NSTX” Nuclear Fusion, Volume 55, Number 10, Page 104002 (2015)
D. Andruczyk, D. N. Ruzic, D. Curreli, J. P. Allain, and the HIDRA Team, “HIDRA: Hybrid Illinois Device for Research and Applications” Fusion Science and Technology, Volume 68, Number 3, Page 497-500 (2015)
P. Raman, I. Shchelkanov, J. McLain, M. Cheng, D. N. Ruzic, I. Haehnlein, B. Jurczyk, R.Stubbers, S. Armstrong, “High deposition rate symmetric magnet pack for high power pulsed magnetron sputtering” Surface & Coatings Technology, Volume 293, Page 10-15 (2015)

2014

Ren, J., J. S. Hu, G. Z. Zuo, Z. Sun, J. G. Li, D. N. Ruzic and L. E. Zakharov, “First results of flowing liquid lithium limiter in HT-7”, Physical Scripta, vol. T159, (2014). https://doi.org/10.1088/0031-8949/2014/T159/014033
D. Mueller, A.L. Roquemore, M. Jaworski, C.H. Skinner, J. Miller, A. Creely, P. Raman, D.N. Ruzic, the HT-7 team, “In-situ measurement of Li coating thickness on high Z substrate for NSTX-U“ Review of Scientific Instruments, Volume 85, Issue11, Page 11E821 (2014)
G.Z. Zuo, J. Ren, J.S. Hu, Z. Sun, Q.X. Yang, J.G. Li, L.E. Zakharov, D.N. Ruzic, the HT-7 team, “Liquid lithium surface control and its effect on plasma performance in the HT-7 tokamak“ Fusion Engineering and Design, Volume 89, Page 2845-2852 (2014)
J.S. Hua, J. Rena, Z. Suna, G.Z. Zuoa, Q.X. Yanga, J.G. Lia, D.K. Mansfieldb, L.E. Zakharovb, D.N. Ruzic, EAST team, “An overview of lithium experiments on HT-7 and EAST during 2012“ Fusion Engineering and Design, Volume 89, Page 2875-2885 (2014)
S.S. Mujumdar, D.Curreli, S.G.Kapoor, D.N. Ruzic, “A Model of Micro Electro-Discharge Machining Plasma Discharge in Deionized Water” Journal of Manufacturing Science and Engineering, Volume 136, Issue 3, Page 031011 (2014)
D. Mueller, A.L. Roquemore, M. Jaworski, C.H. Skinner, J. Miller, A. Creely, P. Raman, D.N. Ruzic, “In situ measurement of low-Z material coating thickness on high Z substrate for tokamaks“ Review of Scientific Instruments, Volume 85, Issue 11, Page 11E821 (2014)
L. Meng, H. Yu, M.M. Szott, J. McLain, D.N. Ruzic, “Downstream plasma transport and metal ionization in a high-powered pulsed-plasma magnetron“ Journal of Applied Physics, Volume 115, Issue 22, Page 223301 (2014)
M. Mozetic, K. Ostrikov, D.N. Ruzic, D. Curreli, U. Cvelbar, A. Vesel, G. Primc, M. Leisch, K. Jousten, O.B. Malyshev,
J.H. Hendricks, L. Kövér, A. Tagliaferro, O. Conde, A.J. Silvestre, J. Giapintzakis, M. Buljan, N. Radić, G. Dražić, S. Bernstorff, H. Biederman, O. Kylián, J. Hanuš, S. Miloševič, A. Galtayries, P. Dietrich, W. Unger, M. Lehocky, V. Sedlarik, K. Stana-Kleinschek, A. Drmota-Petrič, J.J. Pireaux, J.W. Rogers, M. Anderle, “Recent advances in vacuum sciences and applications” Journal of Physics D: Applied Physics, Volume 47, Number 15, Page 153001 (2014)
Z. Ouyang, D.N, Ruzic, M.Kiehlbauch, A. Schrinsky, K. Torek, “Etching mechanism of the single-step through-silicon-via dry etch using SF6/C4F8 chemistry” Journal of Vacuum Science & Technology A, Volume 32, Issue 4, Page 041306 (2014)
W. Xu, D. Curreli, D. N. Ruzic, “Computational studies of thermoelectric MHD driven liquid lithium flow in metal trenches” Fusion Engineering and Design, Volume 89, Issue 12, Page 2868-2874 (2014)
P. Z. Ouyang, W. Xu, D. N. Ruzic, M. Kiehlbauch, A. Schrinsky, K. Torek, “Finite-element simulation models and experimental verification for through-silicon-via etching: Bosch process and single-step etching” Journal of Vacuum Science & Technology A, Volume 32, Issue 4, Page 041303 (2014)
P. Fiflis, A. Press, W. Xu, D. Andruczyk, D. Curreli, D.N. Ruzic, “Wetting properties of liquid lithium on select fusion relevant surfaces” Fusion Engineering and Design, Volume 89, Issue 12, Page 2827-2832 (2014)
E. Ritz, Y. L. Wu, J. Hong, D. Andruczyk, T. S. Cho, D.N. Ruzic, “Atmospheric pressure dielectric barrier discharge (DBD) for post-annealing of aluminum doped zinc oxide (AZO) films” Surface and Coatings Technology, Volume 251, Pages 64-68 (2014)
S. Jung, M. Christenson, D. Curreli, C. Bryniarski, D. Andruczyk, D.N. Ruzic, “Development of a high energy pulsed plasma simulator for the study of liquid lithium trenches” Fusion Engineering and Design, Volume 89, Issue 12, Page 2822-2826 (2014)
M. Ono, M. A. Jaworski, R. Kaita, Y. Hirooka, D. Andruczyk, T. K. Gray, the NSTX-U Research Team, “Active radiative liquid lithium divertor concept” Fusion Engineering and Design, Volume 89, Page 2838-2844 (2014)
D. Andruczyk, A. L. Roquemore, P. Fiflis, D. Mansfield, D. N. Ruzic, “A method to produce lithium pellets for fueling and ELM pacing in NSTX-U” Fusion Engineering and Design, Volume 89, Page 2910-2914 (2014)

2013

Y. Wu, J. Hong, Z. Ouyang, T-S. Cho, and D. N. Ruzic, “Electrical and optical characteristics of cylindrical non-thermal atmospheric-pressure dielectric barrier discharge plasma sources” Surface and Coatings Technology,Volume 234, Page 100-103 (2013)
Y. L. Wu, J. Hong, D. Peterson, J. Zhou, T. S. Cho, D.N. Ruzic, “Deposition of aluminum oxide by evaporative coating at atmospheric pressure (ECAP)” Surface and Coatings Technology, Volume 237, Page 369-378 (2013)
D. Andruczyk, A.L. Roquemore, P.Fiflis, D.K. Mansfield, D.N. Ruzic, “A Method to Produce Lithium Pellets For Fueling and ELM Pacing in NSTX-U” Fusion Engineering and Design, Volume 89, Page 2910-2914 (2013)
H. Yu, D. Andruczyk, D. N. Ruzic, V. Jindal, P. Kearney, “Origin of defects on targets used to make extreme ultraviolet mask blanks” Journal of Vacuum Science & Technology A, Volume 31, Issue 2, Page 021403 (2013)
H. Yu, L. Meng, M. Szott, J. Meister, T. Cho, and D. N. Ruzic, “Investigation and optimization of the magnetic field configuration in high-power impulse magnetron sputtering” Plasma Sources Science and Technology, Volume 22, Number 4, Page 045012 (2013)
P. Fiflis, L. Kirsch, D. Andruczyk, D. Curreli, D.N. Ruzic, “Seebeck coefficient measurements on Li, Sn, Ta, Mo, and W” Journal of Nuclear Materials, Volume 438, Issues 1–3, Page 224-227 (2013)
P. Fiflis, D. Andrucyzk, A. L. Roquemore, M. McGuire, D. Curreli, and D. N. Ruzic, “Lithium pellet production (LiPP): A device for the production of small spheres of lithium” Review of Scientific Instruments, Volume 84, Issue 6, Page 063506 (2013)
W. M. Lytle, D. Andruczyk, and D. N. Ruzic, “Plasma-assisted cleaning by metastable-atom neutralization” Journal of Vacuum Science & Technology B, Volume 31, Issue 1, Page 011603 (2013)
W. Xu, D. Curreli, D. Andruczyk, T. Mui, R. Switts and D.N. Ruzic, “Heat transfer of TEMHD driven lithium flow in stainless steel trenches“ Journal of Nuclear Materials, Volume 438, Supplement, Page S422-S425 (2013)
P. Raman, A. Groll, P. Fiflis, D. Curreli, D. Andruczyk and D. N. Ruzic, “Chemical Sputtering Studies of Lithiated ATJ graphite” Journal of Nuclear Materials, Volume 438, Supplement, Page S655-S658 (2013)
D. Andruczyk and D. N. Ruzic, Ch 9: Thermoelectric properties of lithium, Book Title: Lithium – Technology, Performance and Safety, Editor Francisco L. Tabarés, Nova Science Publishers Inc., New York, 2013, ISBN: 978-1-62417-634-0.

2012

Z. Ouyang, V. Surla, T.S. Cho, D.N. Ruzic, “Characterization of an atmospheric-pressure helium plasma generated by 2.45GHz microwave power” IEEE Transactions on Plasma Science, Volume 40, Number 12, Page 3476-3481 (2012)
C. H. Castano, M. Aghazarian, J. B. O. Caughman, II, and D. N. Ruzic, “Visual and electrical evidence supporting a two-plasma mechanism of vacuum breakdown initiation” IEEE Transactions on Plasma Science, Volume 40, Number 4, Page 1217-1222 (2012)
S. Jung, D. Andruczyk, and D. N. Ruzic, “Laboratory investigation of vapor shielding for Lithium-coated Molybdenum in Devex” IEEE Transaction on Plasma Science, Volume 40, Number 3, Page 730-734 (2012)
Z. Ouyang, T-S Cho, and D. N. Ruzic, “Deposition of YSZ thin films by atmospheric plasma-assisted pulsed laser ablation” IEEE Transaction on Plasma Science, Volume 40, Number 11, Page 2850-2852 (2012)
J. Sporre and D. N. Ruzic, “Debris transport analysis at the intermediate focus of an extreme ultraviolet light source” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 11, Number 2, Page 021117 (2012)

2011

A. Dulkin, E. Ko, L. Wu, I. Karim, K. Leeser, K. J. Park, L. Meng, and D. N. Ruzic, “Improving the quality of barrier/seed interface by optimizing physical vapor deposition of Cu film on hollow cathode magnetron” Journal of Vacuum Science & Technology A, Volume 29, Issue 4, Page 041514 (2011)
D. N. Ruzic and V. Surla, “High-energy density beams and plasmas for micro- and nano-texturing of surfaces by rapid melting and solidification” Journal of Physics D: Applied Physics, Volume 44, Number 17, Page 174026 (2011)
V. Surla, P. Raman, D. Burns, M.J. Neumann, D.N. Ruzic, “Physical and chemical erosion studies of lithiated ATJ graphite” Journal of Nuclear Materials, Volume 415, Issue 1, Supplement, Pages S174-S178 (2011)
D. N. Ruzic, W. Xu, D. Andruczyk and M. A Jaworski, “Lithium-Metal Infused Trenches (LiMIT) for Heat Removal in Fusion Devices” Nuclear Fusion, Volume 51, Number 10, Page 102002 (2011)
V. Surla, M. Tung, W. Xu, D. Andruczyk, M. Neumann, D. N. Ruzic and D. Mansfield, “Seebeck Coefficient Measurements of Lithium Isotopes” Journal of Nuclear Materials, Volume 415, Issue 1, Page 18-22 (2011)
S. Jung, V, Surla, T, K. Gray, D. Andruczyk and D. N. Ruzic, “Characterization of a Theta-Pinch Plasma Using Tripple Probe Diagnostics” Journal of Nuclear Materials, Volume 415, Issue 1, Supplement, Page S993-S995 (2011)
Z. Ouyang, L. Meng, P. Raman, T. S. Cho and D. N. Ruzic, “Laser-assisted plasma coating atmospheric pressure: production ofyttria-stabilized zirconia thermal barriers” Journal of Physics D: Applied Physics, Volume 44, Number 26, Page 265202 (2011)
L. Meng, A. N. Cloud, S. Jung and D. N. Ruzic, “Study of Plasma Dynamics in a Modulated Pulsed Power Magnetron Discharge Using a Time-Resolved Langmuir Probe” Journal of Vacuum Science & Technology A, Volume 29, Issue 1, Page 011024 (2011)
W. Xu, V. Surla, M. A. Jaworski, M. Lee, T. Mui, M. J. Neumann, D. N. Ruzic, “Investigation of the heat transfer in TEMHD driven swirling lithium flow”, Journal of Nuclear Materials 415 (2011).

2010

M.A. Jaworski, J. Kallman, R. Kaita, H. Kugel, B. LeBlanc, R. Marsala, D.N. Ruzic, “Biasing, acquisition, and interpretation of a dense Langmuir probe array in NSTXa)” Review of Scientific Instruments, Volume 81, Issue 10, Page 10E130 (2010)
C. Y. Hwang, S. Jung, Y. S. Hwang and B. C. Cho, “Lethal Effects of Pulsed High-Voltage Discharge on Marine Plankton and Escherichia coli” Water Air & Soil Pollution, Volume 213, Issue 1-4, Page 161-169 (2010)
L. Wu, E. Ko, A. Dulkin, K. J. Park, S. Fields, K. Leeser, L. Meng and D. N. Ruzic, “Flux and energy analysis of species in hollow cathode magnetron ionized physical vapor deposition of copper” Review of Scientific Instruments, Volume 81, Issue 12, Page 123502 (2010)
L. Meng, R. Raju, R. Flauta, H. Shin, D.N. Ruzic and D. B. Hayden “In situ Plasma Diagnostics Study of a Commercial High-Power Hollow Cathode Magnetron Deposition Tool” Journal of Vacuum Science and Technology A, Volume 28, Issue 1, Page 112 (2010)
M. A. Jaworski, T. K. Gray, M. Antonelli, J. J. Kim, C.Y. Lau, M. B. Lee, M. J. Neumann, W. Xu, and D. N. Ruzic, “Thermoelectric Magnetohydrodynamic Stirring of Liquid Metals” Physics Review Letters, Volume 104, Issue 9, Page 094503 (2010)
R. Raju, L. Meng, R. Flauta, H. Shin, M. J. Neumann, T. A. Dockstader and D. N. Ruzic, “Development and Characterization of a Secondary RF Plasma-Assisted Closed-Field Dual Magnetron Sputtering System for Optical Coatings on Large-Area Substrates” Plasma Sources and Technology, Volume 19, Number 2, Page 025011 (2010)
V. Surla, M. A. Jaworski, T. K. Gray, K. Ibano, W. Xu, M. J. Neumann, and D. N. Ruzic, “Lithium research as a Plasma Facing Cmponent Material at the University of Illinois” Thin Solid Films, Volume 518, Issue 22, Page 6663-6666 (2010)
C. R. Struck, R. Flauta, M.J. Neumann, K.N. Kim, R. Raju, R. L. Bristol, D.N. Ruzic, “Grazing Incidence Broad Ion Beams for Reducing Line-Edge Roughness” Journal of Micromechanics and Microengineering, Volume 20, Number 7, Page 075038 (2010)
K. Ibano, D. Ruzic, and V. Surla, “Sputtering and thermal evaporation studies of lithiated ATJ graphite” IEEE Transactions on Plasma Science, Volume 38, Number 3, Page 341-345 (2010)
D. N. Ruzic and A. J. Paul, “Guest editorial special issue on symposium on fusion engineering” IEEE Transactions on Plasma Science, Volume 38, Number 3, Page 222-223 (2010)

2009

M. Jarworski, N.B. Morley, and D. N. Ruzic, “Thermocapillary and Thermoelectric Effects in Liquid Lithium Plasma Facing Components” Journal of Nuclear Materials, Volume 390–391, Page 1055-1058 (2009)
H. Shin, J. Sporre, R. Raju, D. N. Ruzic, “Reflectivity degradation of grazing-incident EUV mirrors by EUV exposure and carbon contamination” Microelectronic Engineering, Volume 86, Issue 1, Page 99-105 (2009)
H. Qiu, S. N. Srivastava, K. C. Thompson, M. J. Neumann, D. N. Ruzic “The Effectiveness of Mo-Au Gibbsian Segregating (GS) Alloys and The Surface Removal Effect on the GS Performance for EUV Collector Optics” Optics Engineering, Volume 48, Number 13, Page 056501 (2009)
J. Sporre, C. H. Castano, R. Raju, and D. N. Ruzic, “Ionic Debris Measurement of Three Extreme Ultraviolet Sources” Journal of Applied Physics, Volume 106, Issue 4, Page 043304 (2009)
M. Racic, K. Ibano, R. Raju and D. N. Ruzic, “Physical Erosion Studies of Plain and Lithiated Graphite” Journal of Nuclear Materials, Volume 390-391, Page 1043-1047 (2009)

2008

H. Qiu, S. N. Srivastava, K. C. Thompson, M. J. Neumann, D. N. Ruzic “Temperature Dependence of Mo-Au Gibbsian Segregating Alloys” Journal of Micro/Nanolithography MEMS & MOEMS, Volume 7, Number 3, Page 033004 (2008)
M. A. Jaworski, C. Y. Laua, D. L. Urbansky, M. B. Malfa, T. K. Gray, M.J. Neumann, and D. N. Ruzic “Observations of liquid lithium uptake in a porous molybdenum foam” Journal of Nuclear Materials, Volume 378 Page 105-109 (2008)
H. Qiu, S. N. Srivastava, K. C. Thompson, M. J. Neumann, and D. N. Ruzic, “Time exposure performance of Mo-Au Gibbsian segregating alloys for extreme ultraviolet collector optics” Applied Optics, Volume 47, Number 13, Page 2443-2451 (2008)
H. Shin, S. N. Srivastava, D. N. Ruzic, “Tin removal from extreme ultraviolet collector optics by inductively coupled plasma reactive ion etching” Journal of Vacuum Science & Technology A, Volume 26, Issue 3, Page 389 (2008)
C. Castano, M. Aghazarian, D.N. Ruzic,“Preliminary evidence of field induced rhenium etching by XEF2 at high vacuum” Journal of Applied Physics, Volume 103, Issue 4, Page 044901 (2008)
O Morris, P Hayden, P Dunne, F O’Reilly, G O’Sullivan, E Sokell1, E L Antonsen, S N Srivastava, K C Thompson and D N Ruzic, “Determination of charge state, energy and angular distributions of tin ions emitted from laser produced plasma based EUV sources” Journal of Physics: Conference Series, Volume 58, Page 391–394 (2008)

2007

Neumann, M. J., DeFrees, R. A., Qiu, H., Ruzic, D. N., Khodykin, O., Ershov, A., and Bristol, R. L, “Plasma cleaning of lithium off of collector optics material for use in extreme ultraviolet lithography applications” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 6, Number 2, Page 23005 (2007)
J.P Allain, M.D. Coventry, D.N. Ruzic, “Collisional and thermal effects on liquid lithium sputtering” Physical Review B, Volume 76, Issue 20, Page 205434 (2007)
S. N. Srivastava, K.C. Thompson, E. L. Antonsen, H. Qiu, J.B Spencer, D. Papke, D. N. Ruzic, “Lifetime measurements on collector optics from Xe and Sn extreme ultraviolet sources” Journal of Applied Physics, Volume 102, Issue 2, Page 023301 (2007)
D.N. Ruzic, K.C. Thompson, B.E. Jurczyk, E.L. Antonsen, S.N. Srivastava, J.B. Spencer, “Reduction of Ion Energies from a Multicomponent Z-Pinch Plasma” IEEE Transactions on Plasma Science, Volume 35, Number 3, Page 606-613 (2007)
T.K. Gray, M.A. Jaworski, D.N. Ruzic, “Target heat loading due to fast, transient heat pulses produced from a conical theta-pinch as a prototype for benchmarking simulations of transient heat loads” Journal of Nuclear Materials, Volume 363-365, Page 1032-1036 (2007)
D.A. Alman, H. Qiu, T. Spila, K. Thompson, E. Antonsen, B. Jurczyk, D.N. Ruzic, “Characterization of Collector Optic Material Samples Exposed to a Discharge-Produced Plasma Extreme Ultraviolet Light Source” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 6, Number 1, Page 013006 (2007)

2006

Huatan Qiu, Keith C. Thompson, S.N. Srivastava, Erik L. Antonsen, Darren A. Alman, Brian E. Jurczyk, D.N. Ruzic, “Optical exposure characterization and comparisons for discharge produced plasma Sn extreme ultraviolet system” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 5, Number 3, Page 033007 (2006)
Huatan Qiu, Darren A. Alman, Keith C. Thompson, Joshua B. Spencer, Erik L. Antonsen, Brian E. Jurczyk, D. N. Ruzic, Tim P. Spila, “Characterization of collector optic material samples before and after exposure in laser produced plasma and discharge produced plasma EUV sources” Journal of Micro/Nanolithography, MEMS, and MOEMS, Volume 5, Number 3, Page 033006 (2006)
M. A. Jaworski, B. E. Jurczyk, Erik L. Antonsen, D. N. Ruzic, “Direct current magnetic insulation of an immersed RF antenna” Plasma Source Science and Technology, Volume 15, Number 3, Page 474-478 (2006)
Erik L. Antonsen, Keith C. Thompson, Matthew R. Hendricks, Darren A. Alman, Brian E. Jurczyk, D. N. Ruzic, “Ion Debris Characterization from a Z-Pinch Extreme Ultraviolet Light Source” Journal of Applied Physics, Volume 99, Issue 6, Page 063301 (2006)
Ning Li, P.W. Brenner, D.N. Ruzic, “Integrated model for the Chemically Enhanced Physical Vapor Deposition (CEPVD) of tantalum nitride-based FILMS” Journal of Vacuum Science & Technology B, Volume 24, Issue 3, Page 1071-1087 (2006).
Nieto, M., D.N. Ruzic, W. Olczak, R. Stubbers, “Measurement of Implanted Helium Particle Transport by a Flowing Liquid Lithium Film” Journal of Nuclear Materials, Volume 350, Page 101-112 (2006)
K.C. Thompson, E.L Antonsen, M.R. Hendricks, B.E. Jurczyk, M. Williams, D.N. Ruzic, “Experimental test chamber design for optics exposure testing and debris characterization of a xenon discharge produced plasma source for extreme ultraviolet lithography” Microelectronics Engineering, Volume 83, Page 476-484 (2006)

2005

Allain, J.P., D. N. Ruzic, M.D. Coventry, D. A. Alman, M.N. Nieto, “A Model for Ion-Bombardment Induced Erosion Enhancement with Target Temperature” Nuclear Instruments and Methods in Physics Research B, Volume 293, Page 347-355 (2005)
Brooks, J.N., J.P. Allain, R. Bastasz, R. Doerner, A. Hassanein, R. Kaita, S. Luckhardt, R. Maingi, R. Majeski, N. Morely, N. Narula, T. Rognlien, D. Rudakov, D. Ruzic, R, Stubbers, M. Ulrickson, C.P.C. Wong, A. Ying, “Overview of the ALPS Program” Fusion Science Technology, Volume 47, Page 669-678 (2005)
M.D. Coventry and D.N. Ruzic, “Incident-mass dependence of temperature-enhanced ion-induced sputtering in liquid metals” Journal of Nuclear Materials, Volume 337-339, Page 1015-1018 (2005)
Qiu, Hua-Tan, D.N. Ruzic, “Molecular dynamics modeling of deuterium in liquid lithium surfaces” Journal of Nuclear Materials, Volume 337-339, Page 1029-1032 (2005)
Stubbers, R., W. Olczak, M. Nieto, D. N. Ruzic, “Measurement of hydrogen absorption in flowing liquid lithium in the flowing lithium retention experiment (FLIRE)” Journal of Nuclear Materials, Volume 337-339, Page 1033-1037 (2005)
Brooks, J.N., J.P. Allain, D.A. Alman and D.N. Ruzic, “Erosion, transport, and tritium codeposition issues of a beryllium wall tokamak” Fusion Engineering and Design, Volume 72, Page 363-375 (2005)
Vargas-López, E., B E Jurczyk, M A Jaworski, M J Neumann, D N Ruzic, “Origins of debris and mitigation through a secondary RF plasma system for discharge-produced EUV sources” Microelectronics Engineering, Volume 77, Page 95-102 (2005)
Jurczyk, B.E., E. Vargas-Lopez, M. N. Neumann, D. N. Ruzic, “Illinois Debris-mitigation EUV Applications Laboratory (IDEAL)” Microelectronics Engineering, Volume 77, Page 103-109 (2005)

2004

Allain, J.P., M. Nieto, M.D. Coventry, R. Stubbers, D.N. Ruzic, “Studies of liquid-metal erosion and free surface flowing liquid lithium retention of helium at the University of Illinois” Fusion Engineering and Design, Volume 72, Page 93-110 (2004)
Li, N., D.N. Ruzic, R.A. Powell, “Chemically Enhanced Physical Vapor Deposition (CEPVD) of TaN diffusion barrier layers for ULSI devices” Journal of Vacuum Science & Technology B. Volume 22, Issue 6, Page 2734-2742 (2004)
Coventry, M.D., J.P. Allain, D.N. Ruzic, “Temperature Dependance of Liquid Sn Sputtering by low energy He and D bombardment” Journal of Nuclear Materials, Volume 335, Page 115-120 (2004)
Alman, D.A, D.N. Ruzic, “Molecular Dynamics Simulation of Hydrocarbon Reflection and Dissociation Coefficients from Fusion-Relevant Carbon Surfaces” Physica Scripta, Volume 2004, T111, Page 145-151 (2004)

2003

M. Nieto, D.N. Ruzic, J.P. Allain, “Experimental measurements of helium retention in flowing liquid lithiumFusion Science & Technology“ Fusion Science and Technology, Volume 44, Issue 1, Page 232-236 (2003)
Alman, D.A., D.N. Ruzic, J.N. Brooks, “Molecular Dynamics Calculation of Carbon/Hydrocarbon Reflection Coefficients on a Graphite Surface Employing Distrubuted Computing” Journal of Nuclear Materials, Volume 313-316, Page 182-186 (2003)
Brooks, J.N., A. Kirschner, D.G. Whyte, D.N. Ruzic, D.A. Alman, “Advances in the Modeling of Chemical Erosion/Redeposition of Carbon Divertors and Application to the JET Tritium Codeposition Problem” Journal of Nuclear Materials, Volume 313-316, Page 424-428 (2003)
M. Nieto, D. N. Ruzic, J.P. Allain, M.D. Coventry and E. Vargas-Lopez, “Helium Retention and Diffusivity in Flowing Liquid Lithium” Journal of Nuclear Materials, Volume 313-316, Page 646-650 (2003)
Allain, J.P., M.D. Coventry, D.N. Ruzic, “Temperature-Dependence of Liquid Lithium Sputtering” Journal of Nuclear Materials, Volume 313-316, Page 641-645 (2003)
Coventry, M.D., J.P. Allain, D.N. Ruzic, “D+, H+, and He+ Sputtering of Solid and Liquid Phase Tin” Journal of Nuclear Materials, Volume 313-316, Page 636-640 (2003)

2002

Allain, J.P., M. Nieto, M.D. Coventry, M.J. Neumann, E. Vargas-Lopes, D.N. Ruzic, “FLIRE—Flowing Liquid Surface Retention Experiment, Design and Testing” Fusion Engineering and Design, Volume 61-62, Page 245-250 (2002)
Allain, J.P., D.N. Ruzic. “Deuterium Treatment Effects on Lithium and Tin-Lithium Sputtering in Solid and Liquid Phase” Hydrogen and Heilium Recycling at Plasma Facing Materials, Ed. Ahmed Hassanein. Netherlands: Kluwer Academic Publishers, 2002. pg. 73-82.
Li, Ning, J.P. Allain, D.N. Ruzic, “Enhancement of Aluminum Oxide Physical Vapor Deposition with a Secondary Plasma” Surface Coatings Technology, Volume 149, Page 161-170 (2002)
Juliano, D.R., D.N. Ruzic, M.M.C. Allain, D.B. Hayden, “Influences on Ionization Fraction in an Inductively Coupled Ionized Physical Vapor Deposition Device Plasma” Journal of Applied Physics, Volume 91, Number 2, Page 605-612 (2002)
J.P. Allain, J.P., D.N. Ruzic, “Measurements and Modeling of Solid Phase Lithium Sputtering” Nuclear Fusion, Volume 42, Number 2, Page 202-210 (2002)

2001

Ranjan, R., J.P. Allain, M.R. Hendricks, D.N. Ruzic, “Absolute Sputtering Yield of Ti/TiN by Ar+/N+ at 400 – 700 eV” Journal of Vacuum Science & Technology A, Volume 19, Issue 3, Page 1004-1007 (2001)
J.P. Allain, D.N. Ruzic, M.R. Hendricks, “Measurements and Modeling of D, H, and Li Sputtering of Liquid Lithium” Journal of Nuclear Materials, Volume 290-293, Page 180-184 (2001)
J.P. Allain, D.N. Ruzic, M.R. Hendricks, “D, He and Li Sputtering of Liquid Eutectic Sn-Li” Journal of Nuclear Materials, Volume 290-293, Page 33-37 (2001)
J.N. Brooks, T. Rognlien, D.N. Ruzic, J.P. Allain, “Erosion/Redeposition Analysis of Lithium-Based Liquid Surface Divertors” Journal of Nuclear Materials, Volume 290-293, Page 185-190 (2001)

2000

Mattas, R.F, J.P. Allain, R. Bastasz, J.N. Brooks, T. Evans, A. Hassanein, S. Luckhardt, K. McCarthy, P. Mioduszewski, R. Maingi, E. Mogahed, R. Moir, S. Molokov, N. Morley, R. Nygren, T. Ronglien, C. Reed, D.N. Ruzic, I. Svitoslavsky, D. Sze, M. Tillack, M. Ulrichson, P.M. Wade, R. Wooley and C. Wong, “ALPS-Advanced Limiter-Divertor Plasma-Facing Systems” Fusion Energy and Design, Volume 49-50, Page 127-134 (2000)
Allain, M.M C. D.B. Hayden, D.R. Juliano, D.N. Ruzic, “Characterization of magnetron-sputtered partially ionized deposition as a function of metal and gas species” Journal of Vacuum Science and Technology A, Volume18, Issue 3, Page 797-801 (2000)
Alman, D.A. and D.N. Ruzic, “A Hydrocarbon Reaction Model for Low Temperature Hydrogen Plasmas and an Application to the Joint European Tours” Physics of Plasmas, Volume 7, Number5, Page 1421-1432 (2000)
Wang, Z., S.A. Cohen, D.N. Ruzic and M.J. Goeckner, “Nitrogen Atom Energy Distributions in a Hollow-Cathode Planar Sputtering Magnetron” Physical Review E, Volume 61, Number 2, Page 1904-1911 (2000)

1999

Smith, P.C. and D.N. Ruzic, “Low-energy Ar+ Ion Induced Angularly Resolved AI(100) and AI(110) Sputtering Measurements” Journal of Vacuum Science and Technology A, Volume 17, Issue 6, Page 3443-3448 (1999)
Hayden, D.B., D.R. Juliano, M.N. Neumann, M.M. Allain, D.N. Ruzic, “Helicon Plasma Source for Ionized Physical Vapor Deposition” Surface Coatings Technology, Volume 120-121, Page 401-404 (1999)
Ruzic, D. N., M.C. Allain, and R.V. Budny, “The Effect of Lithium Wall Conditioning in TFTR on Plasma-Surface Interactions” Journal of Nuclear Materials, Volume 266-269, Page 1303-1308 (1999)
Brooks, J.N., D. Alman, G. Federici, D.N. Ruzic, and D.G.Whyte, “Erosion Redeposition Analysis: Status of Modeling and Code Validation for Semi-Detached Tokamak Edge Plasmas” Journal of Nuclear Materials, Volume 266-269, Page 58-66 (1999)

1998

Smith, P.C. and D.N. Ruzic, “Low-Energy (10-700eV) Angularly Resolved Sputtering Yields for D+ on Be” Nuclear Fusion, Volume 38, Number 5, Page 673-680 (1998)
Hayden, D.B., D.R. Juliano, K.M. Green, D.N. Ruzic, C.A. Weiss, K.A. Ashtiani, T.J. Licata, “Characterization of Magnetron-Sputtering with Partially Ionized Aluminum Deposition,” Journal of Vacuum Science and Technology A, Volume 16, Issue 2, 624-627 (1998)
Haynes, L.A., J.P. Kelly, D.N. Ruzic,“Neutral Atom Modeling of the TFTR First Wall, Pump Ducts, and Neutral Beams,” Fusion Technology, Volume 33, Page 74-83 (1998)

1997

Green, K.M., D.B. Hayden, D.R. Juliano, and D.N. Ruzic, “Determination of Flux Ionization Fraction Using a Quartz Crystal Microbalance and a Gridded Energy Analyzer in an Ionized Magnetron Sputtering System” Review of Scientific Instruments, Volume 68, Issue 12, Page 4555-4560 (1997)
Brooks J.N., D.N. Ruzic, D.B. Hayden, “Sputtering Erosion of Beryllium Coated Plasma Facing Components — General Considerations and Analysis for ITER Detached Plasma Regime” Fusion Engineering and Design, Volume 37, Page 332-337 (1997)
Ruzic, D.N., Preston C. Smith, R.B. Turkot Jr., “Measurement and Modeling of the Angular-Resolved Sputtering Yield of D-Soaked Be by 100, 300, 500 and 700 eV D+” Journal of Nuclear Materials, Volume 241-243, Page 1170-1174 (1997)
Brooks, J.N., R. Causey, G Federici, D.N. Ruzic, “Assessment of Erosion and Surface Tritium Inventory Issues for the ITER Divertor” Journal of Nuclear Materials, Volume 241-243, Page 294-298 (1997)
D.N. Ruzic and D.B. Hayden, “Momentum and Energy Transfer via Neutral Atoms and Molecules in an International Thermonuclear Experimental Reator Low-Pressure (10-mTorr) Gas Target Divertor” Fusion Technology, Volume 31, Page 123-127 (1997)
Hayden, D.B. and D.N. Ruzic, “Simulation of Neutral Atoms and Molecules in an International Thermonuclear Experimental Reator High-Pressure (1Torr) Ultra-High Recycling Divertor” Fusion Technology, Volume 31, Page 128-134 (1997)

1996

Rossnagel, S.M., C. Nichols, S. Hamaguchi, D.N. Ruzic, R. Turkot, “Thin, High Atomic Weight Refractory Film Deposition for Diffusion Barrier, Adhesion Layer, and Seed Layer Applications” Journal of Vacuum Science and Technology B, Volume 14, Issue 3, Page 1819-1827 (1996)
Stotler, D.P., C.H. Skinner, R.U. Budny, A.T. Ramsey, D.N. Ruzic, R.B. Turkot Jr., “Modeling of Neutral Hydrogen Velocities in Tokamak Fusion Test Reactor” Physics of Plasmas, Volume 3, Issue 11, Page 4084-4094 (1996)
Kushner, M.J., W.Z. Collison, D.N. Ruzic, “Electron-Beam Controlled Radio Frequency Discharges for Plasma Processing” Journal of Vacuum Science and Technology, Volume 14, Issue 4, Page 2094-2101 (1996)
Ruzic, D.N., “Hydrogen Collision Dynamics on a Rough Nickel Surface” IEEE Transactions on Plasma Science, Volume 24, Number 1, Page 81-82 (1996)
Juliano, D.R., D.N. Ruzic, D. Hill, K.A. Werley, “Sensitivity of Neutral Throughput to Geometry and Plasma Position in the Tokamak Physics Experiment Divertor Region” Fusion Technology, Volume 29, Page 269-276 (1996)

1995

Cheng, P.F., S.M. Rossnagel, D.N. Ruzic, “Directional Deposition of Cu into Semiconductor Trench Structures using Ionized Magnetron Sputtering” Journal of Vacuum Science and Technology B, Volume 13, Issue 2, Page 203-208 (1995)
Ruzic, D.N., “Neutral Atom and Molecular Transport in a Gaseous Divertor” Journal of Nuclear Materials, Volume 220-222, Page 1091-1096 (1995)
Brooks, J. N., D.N. Ruzic, D.B. Hayden, and R.B. Turkot Jr., “Surface Erosion Issues and Analysis for Dissipative Divertors” Journal of Nuclear Materials, Volume 222, Page 269-273 (1995)
Hill, D.N., B. Braams, J.N. Brooks, D.N. Ruzic, M. Ulrickson, K.A. Werley, R. Campbell, R. Goldston, T. Kaiser, G.H. Neilson, P. Mioduszewski, M.E. Rensink, T.D. Rognlien, “Divertor Design for the Tokamak Physics Experiment” Journal of Nuclear Materials, Volume 222, Page 698-702 (1995)

1994

Driemeyer, D., D. Bowers, J. Davis, D. Kubik, H. Mantz, M. McSmith, T. Rigney, C. Baxi, L. Sevier, M. Carelli, L. Green, D. Ruzic, D. Hayden, M. Gabler, J. Yuen, “ITER Divertor Research and Development Activities” Fusion Technology, Volume 3, Page 603-610 (1994)
Smith, P. C., B. Hu, and D. N. Ruzic, “Low Energy Ion-Induced Electron Emission From Gas-Covered Surfaces” Journal of Vacuum Science and Technology A, Volume 12, Issue 5, Page 2692-2700 (1994)
Hendricks, M. B., P. C. Smith, D. N. Ruzic, A. Leybovich, J. E. Poole, “Effects of Ion-Induced Electron Emission on Magnetron Plasma Instabilities” Journal of Vacuum Science and Technology A, Volume 12, Issue 4, Page 1408-1416 (1994)
Leybovich A., T. Kuniya, P. C. Smith, M. B. Hendricks, and D. N. Ruzic, “Effects of Target Polycrystalline Structure and Surface Gas Coverage on Magnetron I-V Characteristics” Journal of Vacuum Science and Technology A, Volume 12, Issue 4, Page 1618-1622 (1994)

1993

Schmidt, J.A., K.I. Thomassen, D.N. Ruzic, plus many other authors too numerous to list, “The Design of the Tokamak Physics Experiment (TPX)” Journal of Fusion Energy, Volume 12, Number 3, Page 221-258 (1993)
Shaheen, M. A. and D. N. Ruzic, “Evolution of Atomic-Scale Surface Structures During Ion Bombardment: A Fractal Simulation” Journal of Vacuum Science and Technology A, Volume 11, Issue 6, Page 3085-3091 (1993)
Ruzic, D. N., “The Effects of Elastic Scattering in Neutral Atom Transport” Physics of Fluids B, Volume 5, Number 9, Page 3140-3147 (1993)
Schatz, K. D. and D. N. Ruzic, “An Electron-Beam Plasma Source and Geometry for Plasma Processing” Plasma Sources Science and Technology, Volume 2, Number 2, Page 100-105 (1993)
Turkot, R. B. Jr. and D. N. Ruzic, “Time-and Space-Resolved Radio-Frequency Plasma Electron Energy Distributions from a Displacement-Current-Based Electric Probe Diagnostic” Journal of Applied Physics, Volume 73, Number 5, Page 2173-2179 (1993).

1992

Ruzic, D. N., D. R. Juliano, “Effect of Boundary Conditions on the Neutral Gas Temperatures and Densities in the ITER Divertor and Pump Duct” Journal of Nuclear Materials, Volume 196-198, Page 194-198 (1992)
Snipes, J. A., E. S. Marmar, J. L. Terry, M. G. Bell, R. V. Budny, K. W. Hill, D. L. Jassby, D. K. Mansfield, D. M. Meade, H. K. Park, J. D. Strachan, B. C. Stratton, E. J. Synakowski, G. Taylor, D. N. Ruzic, and M. Shaheen, “Wall Conditioning with Impurity Pellet Injection on TFTR” Journal of Nuclear Materials, Volume 196-198, Page 686-691 (1992)
Myers, A. M., D. N. Ruzic, J. R. Doyle, “Monte Carlo Simulations of Sputter Atom Transport in Low-Pressure Sputtering; The effects of Interaction Potential, Sputter Distribution and System Geometry” Journal of Applied Physics, Volume 72, Number 7, Page 3064-3071 (1992)

1991

Rossnagel, S. M., K. Schatz, S. J. Whitehair, C. R. Guarnieri, D. N. Ruzic, and J. J. Cuomo, “The Effects of Substrate Potentials on Electron Cyclotron Resonance Plasmas” Journal of Vacuum Science and Technology A, Volume 9, Number 3, Page 702-706 (1991)
Nguyen, P. L., R. B. Turkot Jr., and D. N. Ruzic, “Energy Distribution Measurements in Radio Frequency Plasma Discharges Using a Cubical Analyzer” Journal of Vacuum Science and Technology A, Volume 9, Number 3, Page 682-687 (1991)
Myers, A. M., J. R. Doyle, J. R. Abelson, and D. N. Ruzic, “Monte Carlo Simulations of Magnetron Sputtering Particle Transport” Journal of Vacuum Science and Technology A, Volume 9, Number 3, Page 614-618 (1991)

1990

Bastasz, R., S. J. Kilpatrick and D. N. Ruzic, “Charge-Exchange Neutral Hydrogen Measurements in TFTR Using Pd-Mos Microsensors” Journal of Nuclear Materials, Volume 176-177, Page 1038-1043 (1990)
Zonca, F., S. A. Cohen, J. Cuthbertson, J. Timberlake, and D. N. Ruzic, “Measurements of Plasma Flows in a Divertor Simulation” Journal of Nuclear Materials, Volume 176-177, Page 746-749 (1990)
Brooks, J. N., D. N. Ruzic, “Modeling and Analysis of Surface Roughness Effects on Sputtering, Reflection, and Sputtered Particle Transport” Journal of Nuclear Materials, Volume 176-177, Page 278-282 (1990)
Ruzic, D. N., K. A. Werley, S. A. Cohen, “Neutral Gas Temperature and Densities in Divertor Region and Pump Duct of ITER” Journal of Nuclear Materials, Volume 176-177, Page 926-934 (1990)
Cain, B. L., D. N. Ruzic, “A Small Electron Cyclotron Resonant Plasma-Based Neutral-Flux Ionizer” Review of Scientific Instruments, Volume 61, Number 11, Page 3473-3478 (1990)
Caughman, J. B. O., D. N. Ruzic, D. J. Hoffman, R. A. Langley, and M. B. Lewis, “Ion Energy Measurements at the Surface of an Ion Cyclotron Range of Frequencies Antenna Faraday Shield” Journal of Vacuum Science and Technology A, Volume 8, Number 6, Page 4011-4016 (1990)
Ruzic, D. N., J. L. Wilson, “Time-Resolved Electric Probe Techniques in Radio Frequency Plasmas” Journal of Vacuum Science and Technology A, Volume 8, Number 5, Page 3746-3751 (1990)
Myers, A. M., D. N. Ruzic, R. C. Powell, J. E. Greene, and J. R. Abelson, “Energy and Mass Resolved Detection of Neutral and Ion Species using Modulated-Pole-Bias Quadrupole Mass Spectroscopy” Journal of Vacuum Science and Technology A, Volume 8, Number 3, Page 1668-1672 (1990)
Ruzic, D. N., “The Effects of Surface Roughness Characterized by Fractal Geometry on Sputtering” Nuclear Instruments and Methods in Physics Research, Volume B47, Page 118-125 (1990)

1989

Ruzic, D. N., K. D. Schatz, and P. L. Long, “A Novel Apparatus to Investigate the Possibility of Plasma-Assisted Cold Fusion” Fusion Science and Technology Technology, Volume 16, Issue 2, Page 251-253 (1989)
Wilson, J. L., J. B. O. Caughman, P. L. Nguyen, and D. N. Ruzic, “Measurements of Time Varying Plasma Potential, and Electron Temperature and Density in a 13.6 MHz RF Discharge” Journal of Vacuum Science and Technology A, Volume 7, Number 3, Page 972-976 (1989)
Caughman, J. B. O., D. N. Ruzic, and D. H. Hoffman, “Floating Potential Measurements in the Near Field of an ICRH Antenna” Journal of Vacuum Science and Technology A, Volume 7, Number 3, Page 1092-1098 (1989)
Ruzic, D. N. and H. K. Chiu, “Modeling of Particle-Surface Reflections Including Surface Roughness Characterized by Fractal Geometry” Journal of Nuclear Materials, Volume 162-164, Page 904-909 (1989)
Bastasz, R. B. L. Cain, T. E. Cayton, R. C. Huges, and D. N. Ruzic, “Plasma-Edge Diagnostics Based on Pd-Mos Diodes” Journal of Nuclear Materials, Volume 162-164, Page 587-592 (1989)

1988

Cain, B. L., D. N. Ruzic, and R. Bastasz, “Production of Focused, Low-Energy, Hydrogen-Ion Using a Colutron Ion Source” Journal of Vacuum Science and Technology B, Volume 6, Number 1, Page 485-490 (1988)

1987

Mandrekas, J., C. E. Singer, and D. N. Ruzic, “Effects of Plasma-Wall Sheath on Transport” Journal of Vacuum Science and Technology A, Volume 5, Number 4, Page 2315-2318 (1987)
Caughman, J. B. O., D. N. Ruzic, and D. H. Hoffman, “The Effects of Radio Frequency Waves on the Sputtering of Ion Cyclotron Resonance Heating Antenna Faraday Shields” Journal of Vacuum Science and Technology A, Volume 5, Issue 4, Page 2301-2304 (1987)
Ruzic, D. N. and G. A. Gerdin, “An In-Situ Technique to Measure Erosion and Deposition in Fusion Devices” Journal of Nuclear Materials, Volume 145-147, Page 453-457 (1987)
Ruzic, D. N., D. Heifetz, and S. Cohen, “The Density Dependence of Neutral Hydrogen Density and Neutral Hydrogen Emission from PLT” Journal of Nuclear Materials, Volume 145-147, Page 527-533 (1987)

1986

Ruzic, D. N., G. A. Gerdin, and C. M. Loxton, “Comparison of Glow Discharge Cleaning and Ion-Impact Desorption of Stainless Steel” Journal of Vacuum Science and Technology A, Volume 4, Number 3, Page 1232-1235 (1986)

1985

Ruzic, D. N. and S. Cohen, “Total Scattering Cross-Sections and Interatomic Potentials for Neutral Hydrogen and Helium, and Some Noble Gasses” Journal of Chemical Physics, Volume 83, Number 11, Page 5527-5530 (1985) – (This publication is derived from Prof. Ruzic’s Ph.D. Thesis)

1984

Cohen, S., S. Bernabei, R. Budny, T. K. Chu, P. Colestock, E. Hinnov, W. Hooke, J. Hosea, D. Hwang, F. Jobes, D. Manos, R. Motley, D. N. Ruzic, J. Stevens, B. Stratton, S. Suckewer, S. Von Goeler, and R. Wilson, “Plasma-Materials Interactions During RF Experiments in Tokamaks” Journal of Nuclear Materials, Volume 128-129, Page 280-291 (1984)

1983

Cohen, S., D. N. Ruzic, D. E. Voss, R. Budny, P. Colestock, D. Heifetz, J. Hosea, D. Hwang, D. Manos, and J. Wilson, “Measurements of Low-Energy Neutral Hydrogen Efflux During ICRF Heating” Nuclear Fusion, Volume 24, Number 11, Page 1490-1496 (1984)
Cohen, S., D. N. Ruzic, D. E. Voss, “Measurements of Low-Energy Neutral Outflux During ICRF Heating” Proceedings of IX International Vacuum Congress, Madrid, Spain, Page 455-468 (1983)
Budny, R., A. Cavallo, S.Cohen, C. Daughney, P. Efthimion, R. Fonck, R. Hulse, D. Hwang, D. Manos, A.-L. Pequet, D. N. Ruzic, J. Schivell, B. Smith, and R. Yelle, “Perturbation of Tokamak Edge Plasma by Laser Blow-Off Impurity Injections” Journal of Vacuum Science and Technology A, Volume 1, Number 2, Page 837-840 (1983)
Ruzic, D. N., S. Cohen, B. Denne, and J. Schivell, “Low-Energy Neutral Spectroscopy During Pulsed Discharge Cleaning in PLT” Journal of Vacuum Science and Technology A, Volume 1, Number 2, Page 818-821 (1983)

1982

Ruzic, D. N., R. Moore, D. Manos, and S. Cohen, “Secondary Electron Yields of Carbon-Coated and Polished Stainless Steel” Journal of Vacuum Science and Technology, Volume 20, Number 4, Page 1313-1316 (1982)
Manos, D., D. N. Ruzic, R. Moore, and S. Cohen, “Laboratory Study of the PDX/PLT Laser Blow-Off Trace Element Injectors” Journal of Vacuum Science and Technology, Volume 20, Number 4, Page 1230-1233 (1982)